Burglar (or intrusion), fire and safety alarms are commonly found in electronic form today. Some systems are dedicated to one mission; others handle fire, intrusion, and safety alarms simultaneously. A system of sensors is connected to a control unit, which in turn connects to a means for announcing the alarm, hopefully to elicit some response.
The Alarm system has been designed to take care of even the minute and most complex security aspects. Burglar Alarm is a formidable electronic security system that maintains a constant vigil over your premise. Sophistication ranges from small, self-contained noisemakers, to complicated, multi zoned digital systems with color-coded computer monitor O/P.
A completely dependable system that does not sleep does not goof or does not go over to the other side. The Security of your premises is something you can hardly afford to sleep over. Or worse still/Lose sleeps over! Now, the Alarm system provides an effective way to minimize your risk.
- Zonal Indication, Tamper Proof, Silent Testing, Battery Backup and Battery Charger.
-Motion Detector System, Speedy Fault Rectification, Prevents Unauthorized use, Modern Design Control Unit.
-Intrusion Alarm panel is available in GSM, PSTN dialer with wired & wireless models.
No longer you are at the mercy of an incompetent watchman. At the flick of an unobtrusive, and concealed micro switch, you can raise the alarm. When you are out of the premises, various, sensors i.e. PIR, Magnetic contact get activated on intrusion, by unauthorized person.
1. Constant Protection
2. Strong Deterrent
3. Uninterrupted Functionality
4. Can Relocate
5. Can operate remotely
- Before using this product, please read this manual carefully to ensure you can use the product correctly to avoid danger or property loss. Please store this instruction manual in a safe place for future reference. Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with DC 12V.
- If the product does not work properly, please contact your Distributor Never attempt to disassemble the camera yourself. (Genie CCTV will not be responsible for any problems caused by unauthorized repair or maintenance.)
-Keep away from any form of liquid while in use.Whilst using the product, you must comply with the electrical safety regulations of the country of use. When the product is mounted on a wall or ceiling, the device shall be firmly fixed.
A fire alarm system is a electrical / electronic system which is connected with many type of devices such as main panel, smoke / heat detectors, mcp, sounder etc.. to detect the fire event by indicating audio or visualize signal at the main or individual devices.
Fire alarm panel is classified in two types in barest.
-Conventional (or) non-addressable system
-Addressable fire alarm system.
Conventional fire alarm systems are being used in many years since it is used in small organizations, schools, shops, etc…its comes with single to multi zone system. Each loops carries multiple number of devices (depends upon manufacturer). So each zones are connected with a same loop of cable. If during the fire event even the single device triggered, the panel will visualized zone alarm indication.
Smoke detector is a device which senses smoke. it will automatically detect the smoke and sent warning signal to the fire alarm panel, which is the part of fire alarm system. The smoke detectors are work in the principal of optical photo electric method. The sensitivity of the smoke detectors may vary depends upon the environment, distance between the floor and the ceiling level and also varies depends upon the manufacture to manufacture. The triggering voltage for the smoke detectors is normally fetched from the fire alarm panel.
Addressable fire alarm system is the advanced system than the non addressable system and during the fire even it will address the particular device, wherever the fire exactly occurs. Each and every device will carry a unique address of the system. So you can pinpoint exactly which device has been activated.
The MCP is operated physically. The physical activation requires human intervention. This is used to pass the signal physically before the devices are get sense the fire. When the signal passes to the fire alarm panel, the fire alarm system generates the evacuation sound to alert the public to evacuate the place immediately.
1. Avoid Smoke Inhalation.
2. Early Fire Detection.
3. Decreased Risk of Fire Damage.
4. Discounts on Insurance.
5. Decreased Risk of Fire Damage.
6. Placement Flexibility
7. 24/7 Monitoring
- Before using this product, please read this manual carefully to ensure you can use the product correctly to avoid danger or property loss. Please store this instruction manual in a safe place for future reference. Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with DC 12V.
- If the product does not work properly, please contact your Distributor Never attempt to disassemble the camera yourself. (Genie CCTV will not be responsible for any problems caused by unauthorized repair or maintenance.)
- Keep away from any form of liquid while in use. Whilst using the product, you must comply with the electrical safety regulations of the country of use. When the product is mounted on a wall or ceiling, the device shall be firmly fixed.
